The correct way to install and use indoor killer lamp

The indoor killer lamp can be divided into electric shock type and sticky trap type according to the function of killing. Fence or sticky fly paper, electrocute or stick it to kill insects and flies.

Indoor Electric Shock Fly Killer

 1. Electric shock indoor fly killer

1. Installation guide:

Suggested installation location: kitchen area, above the passage of about 4m in the back door and the door connected to the outside field, avoid close to the lighting source.

Suggested installation quantity: one in the back door that communicates with the outside world, and one in the area near the door that communicates with the outside field. If the density of flying insects in the restaurant is high, it can be appropriately increased according to the actual situation.

2. Suitable installation position for electric shock type fly killer: suitable for installation in the aisle between the infield and outfield doors or the back door of the restaurant.

3. Incorrect installation location:

It should not be installed on workbenches, above food-contact containers or equipment, and in finishing rooms.


2. Indoor sticky fly killer

1. Installation guide:

Suggested installation location: about 4m inside the door that communicates with the outside world or the often-opened incoming door, the installation location cannot be seen from the outside, and avoid sticking to the lighting source.

Suggested installation quantity: one in each area near the door that communicates with the outside world. If the density of flying insects in the restaurant is high, it can be appropriately increased according to the actual situation.

2. Points to note:

Less susceptible to collision between people and goods;

The wall within 2m of the installation location is equipped with a 24h uninterruptible power socket;

The best effect is when the bottom of the fly killer is 1.8-2.0m away from the ground and the top is 0.6-1.2m away from the ceiling;

When the doors and windows are open, the installation location cannot be seen from the outside;

It cannot be above the entrance and access doors, and the best distance from the door is 4m or more;

Not in dusty, high temperature, severe cold or strong airflow locations;

The dining area should not be near the guest table or any location with exposed food such as the serving table, salad bar, etc.

In the food processing area, it shall not be installed above the equipment or utensils for food processing, cooking, packaging, and placement, and maintain a horizontal distance of 1.5m or more;

It is not suitable to be installed in a position exposed to direct sunlight or close to the lighting source;

A location where the light is not easily blocked by inventory and decorations.