The reason why the indoor heater does not heat

1. After the heater has been running for a period of time (according to the user's usage), the ignition plug should be unscrewed to clean up the carbon deposits, otherwise it will affect the heating and cause no heating.

2. If too much carbon deposits cause the thermal efficiency to decrease, clean the radiating fins on the inner wall of the water jacket and the carbon deposits in the combustion chamber.

Precautions for use:
1. The temperature of the air outlet of the equipment is very high, especially the temperature inside the combustion chamber reaches 800 degrees Celsius. Therefore, it is forbidden to stand 2 meters in front of the air outlet and to store flammable materials at 10 meters in front of the equipment. The rear of the equipment should be kept at least 50cm away from the object to ensure unobstructed air intake.

2. The heater is a dangerous product. It is forbidden for children, the handicapped, the mentally handicapped, or the mentally handicapped to touch it. The manager of the equipment must provide a certain degree of training to the equipment before it can be used safely.

3. For direct-fired equipment, it is necessary to ventilate the room regularly to ensure adequate supply of indoor oxygen and discharge of exhaust gas, otherwise severe cases may cause hypoxia, suffocation, carbon monoxide poisoning, etc.

4. For indirect combustion equipment, the flue must be introduced indoors, or the equipment must be placed outdoors, otherwise it will cause indoor air pollution and carbon monoxide poisoning.

5. Do not dismantle, modify, or repair the equipment without authorization, unless it is carried out under the authorization and guidance of the manufacturer, otherwise there may be danger, and the manufacturer will not be responsible for any consequences.